When start the work of cut-to-length line, the roll sheet will be placed on the coil unloading car and transfer it to the decoiler, before that it must confirm the roll and the decoiler have same direction. The coil unloading car is fixed on the foundation between the storage table and the decoiler, transfer the coil to the right position and height, and make sure the coil inner fix to the decoiler in the middle position, then the coil unloading car and return. after the decoiler expansion created .turn on the outside decoiler and expend inner side, use the upper roll to fix the sheet head, then cut the packed belt, lift the feeding device peeler to support the sheet head, jog the decoiler and release roll, shrink the peeler leading the sheet in to the pinch roll and down the pinch roll. Make the sheet go in the leveler, the sheets after leveling will be measured & then be cut by the rotary flying shear synchronized. The finished products will be conveyed into the stacker. According to the request for stacking, they can be stacked by 1# or 2# stacker in order. At the end, the sheets can be taken out for packing or transferring.

The Max. Speed for the whole line is about 70m/min.

The cutting is finished by the rotary flying shear.

It works with 2 sets of stackers with continuous working & convenient changing.